Connections To The Q-750D And Dhd Controller; Connector Panel Access; Connecting The Dhd Controller To The Q-750D - Runco Quantum Color Q-750d Series Installation & Operation Manual

Proceed as follows to connect the DHD Controller to the Q-750d, your video sources,
external controller(s) – if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
To access the connector panel, pull
firmly on the cable access cover to
open it.
Digital Video Connection: Connect the HDMI Output of the DHD Controller to the DHD
Input of the Q-750d as shown in Figure 3-10.
Figure 3-10. Connecting the Q-750d to the DHD Controller
Q-750d Series Installation/Operation Manual
RS-232
RS-232
DHD INPUT
INPUT DHD
HDMI
OUT
AC
AC
RS-232
OUT
29
Installation
3.6
Connections to the
Q-750d and DHD
Controller

Connector Panel Access

Connecting the DHD
Controller to the Q-750d