Connections To The Vx-44D/-55D And Dhd Controller; Connector Panel Access; Connecting The Dhd Controller To The Vx-44D/-55D - Runco Video Xtreme VX-44d Installation & Operation Manual

Proceed as follows to connect the DHD Controller to the VX-44d/-55d, your video
sources, external controller(s) – if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
To access the connector panel, pull firmly on the cable access cover to open it.
Digital Video Connection: Connect the HDMI Output of the DHD Controller to INPUT 2
(DVI) of the VX-44d/-55d as shown in Figure 3-8.
RJ-11
to DB-9
Adapter
(provided)
RS-232
Communication
Cable
(provided)
HDMI OUT
Figure 3-8. Connecting the VX-44d/-55d to the DHD Controller
Runco VX-44d/-55d Installation/Operation Manual
VX-44d/VX-55d Input Panel
DHD Controller
DVI-to-HDMI Cable
(not provided)
RS-232 OUT
29
Installation
3.7
Connections to the
VX-44d/-55d and DHD
Controller

Connector Panel Access

Connecting the DHD
Controller to the
VX-44d/-55d