Connections To The Vx-40D/-50D/-60D/-80D And Dhd Controller; Connector Panel Access; Connecting The Dhd Controller To The Vx-40D/-50D/-60D/-80D - Runco Video Xtreme VX-40d Owner's Operating Manual

Proceed as follows to connect the DHD Controller to the VX-40d/-50d/-60d/-80d, your
video sources, external controller(s) – if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
To access the connector panel, pull firmly on the cable access cover to open it.
Connect the DVI, RGBHV and RS-232 outputs from the DHD Controller to the
corresponding inputs on the VX-40d/-50d/-60d/-80d; see Figure 3-8.
Runco International
Union City, CA
OUTPUTS
Pr Y Pb
R G B
Video Processor / Controller
H V H/V
RGB-HV OUT
Figure 3-8. Connecting the VX-40d/-50d/-60d/-80d to the DHD Controller
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
INPUTS
Pr Y Pb
R G B H
Model
R G B H
Pr Y Pb
SDI
DVI Out DVI 1 DVI 2 Option
DVI
OUT
Red Green Blue
SYSTEM CONTROL INTERFACE
V
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
TRIGGERS
HD1
1 2 3 IR
HD2
V
Pb Pr Y S-Video 1
Component Video Video S-Video 2 RS-232 Out RS-232 Control
RS-232
OUT
29
3.7
Connections to the
VX-40d/-50d/-60d/
-80d and DHD
Controller

Connector Panel Access

Connecting the DHD
Controller to the
VX-40d/-50d/-60d/-80d
Horiz Vert
CAUTION
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
100-230VAC 50-60 Hz, 165 Watts Max
Made In USA
Installation