Connecting 12-Volt Trigger Outputs To External Equipment; Connecting 12-Volt Trigger Outputs - Runco Quantum Color Q-750d Series Installation & Operation Manual

If your Q-750d is equipped with a CineWide with AutoScope system, connect the
AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see Figure 3-18.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
AutoScope Lens Motor
Power
AC Input
Switch
3.5-mm
mini plug
Retractable Screen or other
12-volt trigger-activated
device
Figure 3-18. Connecting 12-volt Trigger Outputs
Q-750d Series Installation/Operation Manual
Sleeve = Ground
Tip = +12V
37
Installation
Connecting 12-volt
Trigger Outputs to
External Equipment