Table of Contents
Advertisement
Other considerations and tips that can help improve your installation:
• Keep the ambient temperature constant and below 35°C (95°F). Keep the projector
away from heating and/or air conditioning vents. Changes in temperature may cause
drifts in the projector circuitry, which may affect performance.
• Keep the projector away from devices that radiate electromagnetic energy such as
motors and transformers. Common sources of these include slide projectors,
speakers, power amplifiers and elevators.
If you are installing a standard (non-CineWide) Q-750d, skip this step and proceed with
Mounting the Q-750d (page 28).
If you are installing a Q-750d/CineWide, proceed with Installing the Fixed CineWide
Base Plate (Q-750d/CineWide) (page 26).
If you are installing a Q-750d/CineWide with AutoScope, proceed as follows to install the
AutoScope lens motor.
1. Do not install the CineWide lens yet, only the fixed CineWide
Note
2. Some components shipped with your projector may differ slightly
Q-750d Series Installation/Operation Manual
base plate or AutoScope lens motor. You will install the
CineWide lens after you install the projector and adjust the
primary lens.
from what is shown in these instructions.
21
Installation
Other Considerations
3.4
Installing the Optional
CineWide/AutoScope
Lens Mount
Advertisement
Table of Contents
