Ricoh SP C360 series User Manual page 145

Problem
An error message is still
displayed, even if the
indicated cover is closed.
Images are printed on the
reverse side of the paper.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Cause
One or more of the covers
that are not indicated are
still open.
You may have loaded the
paper incorrectly.
Using curled paper often
causes misfeeds, soiled
paper edges, or slipped
positions while stack printing
is performed.
The tray's side or end fences
may not be set properly.
Copy paper size setting is
not correct.
When You Have Problems Operating the Machine
Solution
Close all the covers of the machine.
Load the paper correctly. For details
about loading paper, see "Loading
Paper", Paper Specifications and
Adding Paper.
• Flatten the paper with your hands
to straighten out the curl.
• Load the paper up side down so
that the curled edges face
downward. For details about
supported paper, see "Supported
Paper", Paper Specifications and
Adding Paper.
• Place the cut paper on a flat
surface to prevent it from curling,
and do not lean it against the
wall. For details about the proper
way to store paper, see "Paper
Storage", Paper Specifications
and Adding Paper.
• Remove the misfed paper. For
details about removing jammed
paper, see "Removing Jammed
Paper or Card", Troubleshooting.
• Check that the side or end fences
are set properly. Also, check that
the side fences are locked. For
details about setting the side and
end fences, see "Changing the
Paper Size", Paper Specifications
and Adding Paper.
Remove the misfed paper. For details
about removing jammed paper, see
"Removing Jammed Paper or Card",
Troubleshooting.
143