When The Indicator Lamp For [Check Status] Is Lit Or Flashing - Ricoh SP C360 series User Manual

9. Troubleshooting
When the Indicator Lamp for [Check Status] Is
Lit or Flashing
If the indicator lamp for [Check Status] lights up or flashes, press [Check Status] to display the [Check
Status] screen. Check the status of each function in the [Check Status] screen.
[Check Status] screen
1
1. [Mach./Applic. Stat] tab
Indicates the status of the machine and each function.
2. Status icons
The status icons that can be displayed are described below:
: The function is performing a job.
: An error has occurred on the machine.
: The function cannot be used because an error has occurred in the function or machine. This icon may also
appear if the toner is running low.
3. [Check]
If an error occurs in the machine or a function, press [Check] to view details.
Pressing [Check] displays an error message or the corresponding function screen. Check the error message
displayed on the function screen and take the appropriate action. For details about how to resolve the
problems described in error messages, see "When Messages Appear", Troubleshooting.
4. Messages
Displays a message that indicates the status of the machine and each function.
The following table explains problems that cause the indicator lamp for [Check Status] to light or flash.
138
4
2
3
DUP392