Adding Paper And Toner; Workflow For Loading Paper And Configuring Paper Sizes And Types - Ricoh SP C360 series User Manual

8. Adding Paper and Toner

This chapter describes how to load paper into the paper tray and recommended paper sizes and types.
Workflow for Loading Paper and Configuring
Paper Sizes and Types
This section explains how to load paper and operations required after paper is loaded.
After following the procedures below, you can copy or print on the paper that is loaded in the machine.
Load paper into the paper tray.
Specify the paper type and size.
Specify the paper type and size on the printer driver.
For details about the procedures, refer to the next page.
Procedure
For details about recommended paper, see page 124 "Supported Paper".
See page 102 "Loading Paper".
When loading envelopes, see page 112 "Loading Envelopes".
See "Changing the Paper Size", Paper Specifications and Adding Paper.
For PCL and PostScript 3 printer drivers for windows, see Print.
For PS3 printer driver for Mac OS X and macOS, see PostScript 3.
Reference
DSG260
101