Ricoh SP C360 series User Manual page 147

Problem
Misfeeds occur when
printing to envelopes.
When printing to envelopes,
the envelopes may be fed in
together, or the envelopes
may not be fed.
Cannot print in duplex
mode.
Cannot print in duplex
mode.
The machine does not turn
off in 7 minutes after the
main power is turned off.
Cause
The envelopes are curled.
The envelopes are curled.
You have selected a paper
tray that is not set for duplex
printing.
You have selected a paper
type that cannot be used for
duplex printing.
The machine cannot perform
the shutdown procedure.
When You Have Problems Operating the Machine
Solution
Make sure you fully flatten curled
envelopes before you load them. Do
not stack envelopes over the specified
limit for the paper tray. If misfeeds still
occur after the envelopes have been
flattened, load envelopes on the tray
one at a time and print them
individually. For details about how to
load envelopes, see "Loading
Envelopes", Paper Specifications and
Adding Paper.
Make sure you fully flatten curled
envelopes before you load them. Do
not stack envelopes over the specified
limit for the paper tray. If misfeeds still
occur after the envelopes have been
flattened, load envelopes on the tray
one at a time and print them
individually. For details about how to
load envelopes, see "Loading
Envelopes", Paper Specifications and
Adding Paper.
Change the setting for "Apply 2 sided"
in "Tray Paper Settings" to enable
duplex printing for the paper tray. For
details about setting "Apply 2 sided",
see "Tray Paper Settings", Connecting
the Machine/ System Settings.
In "Tray Paper Settings", select a paper
type that can be used for duplex
printing. For details about setting
"Paper Type", see "Tray Paper
Settings", Connecting the Machine/
System Settings.
Repeat the shutdown procedure. If the
machine does not turn off, contact your
service representative.
145