Copying An Id Card Using The Exposure Glass - Ricoh SP C360 series User Manual

3. Copy
3. If you want to change the card size, press [Change Card Size]. You can select a specified
size or specify a new size.
4. If you want to change the layout, press [Change Layout]. You can select [Vertical Layout]
or [Horizontal Layout].
5. Set the ID card into the ID Card Feeder front side down.
Copying starts automatically.
6. Remove the original, and then press [Finish].

Copying an ID Card Using the Exposure Glass

1. Press [ID Card Copy].
2. Press [ID Card Copy To Next].
3. Press [Change Method of Setting Original].
4. Press [Place on Exposure Glass], and then press [OK].
5. Place the original front side down on the exposure glass.
When copying onto A4 (8
Place the original in
6. Press [Start].
7. Place the original back side down on the exposure glass, and then press [Start] again.
8. Remove the original, and then press [Finish].
68
1
/ × 11) size paper
2
orientation and in the center of the A5 (5
A5 A5
1 1 1
(5 (8 (8 / / 8 11 11 ) / )
2 2 2
1 1
/ × 8 / ) scan area.
2 2
DUP468