Ricoh SP C360 series User Manual page 51

4. Press the program number you want to register.
5. Enter the program name.
6. Select the icon for the program.
7. Press [OK].
8. Press [Place].
Even if you select [Do not Place], you can add shortcuts to the program to the [Home] screen after
the program registration is complete.
9. Press [Exit].
• [Fax] and [Quick Fax] are available for SP C360SFNw/C361SFNw only.
• You can enter up to 40 characters for a program name.
• When a specified program is registered as the default, its values become the default settings, which
are displayed without recalling the program, when modes are cleared or reset, and after the
machine is turned on. See "Changing the Default Functions of the Initial Screen", Convenient
Functions.
• When the paper tray you specified in a program is empty and if there is more than one paper tray
with the same size paper in it, the paper tray prioritized under [Paper Tray Priority: Copier] or
[Paper Tray Priority: Fax] in the [Tray Paper Settings] tab will be selected first. For details, see "Tray
Paper Settings", Connecting the Machine/System Settings.
• Folder destinations that have protection codes cannot be registered to a program of the scanner
mode.
• Programs are not deleted by turning the power off or by pressing [Reset] unless the program is
deleted or overwritten.
• Programs can be registered to the [Home] screen, and can be recalled easily. For details, see
page 35 "Adding Icons to the [Home] Screen".
Registering Functions in a Program
49