Bluetooth Board Assembly - NEC Versa TXi Series Service Manual

Bluetooth Board Assembly

Remove the Bluetooth board and attached antenna board as follows.
1. Remove the primary battery, keyboard, front cover and VersaGlide assembly, and PC card
assembly from the notebook.
Locate the Bluetooth board and attached antenna board on the left side of the notebook,
2.
under the former location of the PC card assembly. Note that the boards are hardwired
together.
Remove the three screws securing the antenna bracket to the notebook.
3.
4. Remove the two screws securing the Bluetooth board to the notebook.
5. Turn the Bluetooth board over and unplug the cable from its connector on the board.
6. Remove the Bluetooth board, antenna bracket, and antenna board from the notebook.
Removing the Bluetooth board, antenna bracket, and antenna board
3-12 Disassembly and Reassembly
A – Bracket Screws (3)
B – Antenna Bracket
C – Bluetooth Board Screws (2)
D – Bluetooth Board