PC Card Assembly
Remove the PC card assembly as follows.
1.
Remove the primary battery, keyboard, and front cover and VersaGlide assembly from the
notebook.
2.
Locate the PC card assembly on the left side of the notebook.
Remove the four screws securing the assembly to the notebook.
3.
Pull up on the assembly to unplug it from connector P2 on the main board.
4.
Lift the assembly out of the notebook.
5.
Removing the PC card assembly
A – Screws (4)
B – PC Card Assembly
C – Connector P2
Disassembly and Reassembly 3-11