Table of Contents
Advertisement
Required Tools and Equipment
All Versa TXi notebook disassembly/reassembly procedures are performed using the following
tools:
n
small Phillips screwdrivers (# 1 and # 0)
n
small flat-blade screwdriver
n
tweezers.
Disassembly
This chapter contains step-by-step disassembly procedures for the system. Reassembly is the
reverse of disassembly. Each procedure is supported by a simplified disassembly illustration.
The illustrated parts breakdown and parts lists for the system unit are included in Chapter 5.
For complete disassembly of the system, follow the disassembly order listed in the following
table. For disassembly of a specific part, go to the section containing the part removal procedure.
Sequence
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
When disassembling the system unit, follow these general rules.
n
Turn off the system and unplug all power and all options, including the AC adapter (if
connected), primary battery, and optional secondary battery (if installed).
3-2 Disassembly and Reassembly
Versa TXi Notebook Disassembly Sequence
Part Name
Primary Battery
Memory Module
NEC VersaBay IV Slot Devices (storage devices, optional secondary
battery, or weight-saving module)
Keyboard
Front Cover and VersaGlide Assembly
Hard Disk Drive
CMOS Battery
PC Card Assembly
Bluetooth Board Assembly
USB Board
Top Cover Assembly
Speakers
Switch Board
LCD Panel
Fan/Heat Plate Assembly
Main Board
Mini PCI Board (modem/network board, modem board)
Sound Board
Advertisement
Table of Contents
