Table of Contents
Advertisement
Menu Item
Bluetooth
Remote Power On
®
Intel
SpeedStep™
I/O Device Configuration
Parallel port
Mode
Base I/O Address
USB Floppy
2-14 System Configuration and Setup
Advanced Menu
Settings (default is bold)
Disabled, Enabled
Enables or Disables the Bluetooth wireless
functionality.
Disabled, Enabled
Select Enabled to allow the LAN board to
wake the system.
Disabled, Battery Operation, Automatic
Use Automatic for the system to perform in
full power mode when the system is running
under AC power.
Use Battery Operation for the system to use
power conservatively whether the system is
running on AC power or battery power.
Use Disabled to turn off Intel SpeedStep
technology.
Press Enter to bring up the I/O Device
Configuration submenu to configure the
serial and parallel ports, and the diskette
drive controller.
Auto, Disabled, Enabled
Use Enabled to manually configure the
Parallel Port. Use Disabled to disable the
Parallel Port. Use Auto to allow the BIOS or
operating system to configure the Parallel
Port.
Output Only, Bi-directional, ECP, EPP
378, 3BC, 278
This selection only appears when Parallel
Port is set to Enabled. Select the base I/O
address for the parallel port.
Disabled, Enabled
Use Enabled to allow the USB diskette drive
to be recognized when attached.
Advertisement
Table of Contents
