Lcd Status Bar, Versaglide Assembly, 33.6 Kbps Modem Board, Metal Keyboard Supports; Lcd Status Bar, Versaglide Assembly, Modem Board, Metal Keyboard Supports - NEC VERSA 6050MH Service Manual

4-14 Field Service Guidelines
LCD Status Bar, VersaGlide Assembly, 33.6 Kbps Modem Board, Metal
Keyboard Supports
Remove the LCD status bar, VersaGlide, 33.6 Kbps modem board, and/or metal keyboard
support as follows.
1. Remove the LCD, top cover, keyboard, power button and rear IR assembly as
previously described.
2. Remove the LCD status bar as follows.
T
Locate the ribbon cable that attaches to the CPU board via connector P5.
T
Use the tip of a screwdriver and carefully open the connector tabs.
T
Lift up the LCD status bar.
Figure 4-11 LCD Status Bar, VersaGlide Assembly, Modem Board,
3. Remove the VersaGlide assembly as follows.
T
Locate the cable on the VersaGlide assembly.
T
Disconnect the cable from connector P6 on the CPU board.
T
Lift the VersaGlide out of the base unit.
Metal Keyboard Supports