Front Features - NEC Versa TXi Series Service Manual

Front Features

The front features of the Versa TXi notebook are described after the figure.
A – Microphone
B – Power Status LED
C – Battery Charging LED
D – Bluetooth Status LED
n
Microphone — Built-in microphone for recording monophonic sound directly into the
notebook computer.
n Power Status LED — Lights to indicate the following:
— Lights green when the system power is on.
— Blinks green when the system is in Standby mode.
— Lights yellow (blinks when in Standby mode) to indicate that battery power is at 8%
capacity or less.
— Lights amber (blinks when in Standby mode) to indicate that battery power is at 3%
capacity.
n Battery Charging LED — Lights to indicate battery charging activity.
— Lights amber when the primary battery is charging. Blinks amber to indicate an error.
The primary battery is installed in the battery bay.
— Lights green when the secondary battery is charging. Blinks green to indicate an error.
The secondary (optional) battery is in the NEC VersaBay IV slot.
n Bluetooth Status LED — Lights when Bluetooth power is on (only in systems with
Bluetooth).
n
IEEE Port — Use this port to daisy chain up to 63 IEEE devices to the system. IEEE
devices support the 1394 standard of Plug and Play connectivity for transfer rates up to
400 Mbps.
n
Microphone (MIC) — Lets you connect an external microphone for monophonic recording
or amplification through the system. Plugging in an external microphone disables the built-
in microphone.
Front features
E – IEEE 1394 Connector
F – Microphone In
G – Dual Headphone Jack and Optical In/Out
H – Volume Control
System Overview 1-7