Security Menu - NEC Versa TXi Series Service Manual

Security Menu

Choose the Security Menu by selecting Security in the legend bar on the Main Menu screen.
Other Security Menu options are available by selecting submenus.
Use the arrow keys to select one of the Security Menu options and press
submenu. Items with out-out text are not available. Explanations of each Security Menu item are
in the following table.
Menu Item
Supervisor Password Is
User Password Is
Set Supervisor Password
Set User Password
Security Mode
Password on Boot
Fixed Disk Boot Sector
Diskette Access
Assign HDD Password
Security Menu Items
Settings (default is bold)
Clear, Set
This read-only field indicates whether a
supervisor password has been set.
Clear, Set
This read-only field indicates whether a user
password has been set.
Press Enter to access.
Use this field to set or change the supervisor
password. Press Enter to bring up a dialog
box where the password can be entered and
confirmed.
Press Enter to access.
Use this field to set or change the user
password. Press Enter to bring up a dialog
box where the password can be entered and
confirmed.
Password, SmartCard, FingerPrint*
Use this field to select which security mode
to enable on your system.
Disabled, Enabled
When Enabled, requires password entry
before boot. System remains in secure
mode until the password is entered.
Normal, Write Protect
Write Protect protects the boot sector on the
hard disk from viruses.
Supervisor, User
Controls access to the diskette drive.
Press Enter to access.
Use this field to set or change the hard drive
password. Press Enter to bring up a dialog
box where the password can be entered and
confirmed.
System Configuration and Setup 2-15
Enter to select a