Icom IC-7100 Instruction Manual page 164

Previous view
16
ANTENNA TUNER OPERATION
Operating the AT-180
D
Before operating
CAUTION:
• NEVER transmit with the tuner ON if no antenna is
connected. This will damage both the transceiver
and antenna tuner.
• NEVER transmit with the tuner ON if no antenna is
connected. This will damage both the transceiver
and antenna tuner.
NEVER operate the AH-4 without an antenna connect-
ed. The tuner and transceiver will be damaged.
NEVER operate the AH-4 when it is ungrounded.
Transmitting before tuning may damage the transceiver.
Note that the AH-4 cannot tune when using a 1⁄2O long
wire or on a multiple of that frequency.
16-5