Icom IC-7100 Instruction Manual page 175

Previous view
17
SET MODE
Set mode items and Default settings (Continued)
NOTE: The default settings shown below in bold are for the USA version.
The default settings may differ, depending on your transceiver version.
Display
LCD Contrast
LCD Backlight
Key Backlight
Meter Peak Hold
BW Popup (PBT)
BW Popup (FIL)
RX Call Sign Display
RX Message Display
Reply Position Display
TX Call Sign Display
Scroll Speed
VOICE TX Name Display
KEYER Memory Display
Opening Message
Power ON Check
Display Language
System Language
Time Set
Date/Time
DATE
TIME
GPS Time Correct
UTC Offset
Clock Display
Auto Power OFF
In this item, set the transceiver's display options.
0%~25%~100%
0%~50%~100%
0%~50%~100%
OFF or ON
OFF or ON
OFF or ON
OFF, Auto or Auto (RX Hold)
OFF or Auto
OFF or ON
OFF, Your Call Sign or My Call Sign
Slow or Fast
OFF or ON
OFF or ON
OFF or ON
OFF or ON
English or Japanese
English or Japanese
In this item, set the time options.
2000/01/01~2099/12/31
0:00~23:59
OFF or Auto
–14:00~+9:00~+14:00
Local or UTC
OFF, 30min, 60min, 90min or 120min
17-9
Sets the contrast level of the LCD.
Sets the backlight level of the LCD.
Sets the backlight level of the key.
Turns the Meter Peak Hold function ON or OFF.
Selects whether or not to display the PBT shifting
value while rotating the TWIN-PBT control.
Selects whether or not to display the IF fi lter width
and shifting value when the IF fi lter is switched.
Selects whether or not to display the call sign of
the caller station when a call is received.
Selects whether or not to display and scroll a re-
ceived message.
Selects whether or not to display the caller's po-
sition data when the data is included in the Auto
Replay signal.
Selects whether or not to display My or Your call
sign while transmitting.
Sets the scrolling speed of the message, call
sign, or other text, that are displayed on the
transceiver's LCD.
Selects whether or not to display the voice TX
memory name on the voice TX memory selec-
tion display.
Selects whether or not to display the keyer mem-
ory contents on the keyer send selection display.
Selects whether or not to display the opening
message at power ON.
Selects whether or not to display the RF Power,
RIT, Auto Power OFF condition at power ON.
Sets the screen display language type in the DR
mode or Menu mode.
When the System Language is "English," this
item disappears.
Sets the system language of the transceiver.
Sets the date.
Sets the time.
Selects whether or not to automatically correct
the time data by a received GPS sentence.
Sets the time difference between UTC (Universal
Time Coordinated) and the local time.
Sets the clock display mode.
Sets to automatically turn OFF the transceiver
power after no operation is made during this set
period.