D Transmit Frequency Monitor Check; D 1750 Hz Tone Burst - Icom IC-7100 Instruction Manual

Previous view
4
RECEIVE AND TRANSMIT
Repeater operation (Continued)
D
Transmit frequency monitor check
You may be able to directly receive the other party's
transmitted signal without having to go through a re-
peater. This function helps you to check whether direct
communication can be made, or not.
➥
While receiving, hold down
can directly receive the other party's transmitted sig-
nal.
• While holding down
XFC
frequency offset are displayed above the function menu.
L eft D isplay R ight
C enter
D
1750 Hz tone burst
A 1750 Hz tone is required to access most European
repeaters.
q
In the FM mode, push
MENU
to select the "M-2" screen (M-2 menu).
w
Push [PTT] on the microphone to transmit, and then
touch [TONE](D) during repeater access.
• "1750Hz TONE" appers.
e
Communicate in the normal way.
(R) to see if you
XFC
(R), the duplex direction and
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
(C) one or more times
• While hold down
Duplex direction and frequency offset
• While hold down [PTT]
4-28
Hold down
XFC
XFC
Displays the
transmit fre-
quency
Popup window appears