Icom IC-7100 Instruction Manual page 94

Previous view
11
MEMORY OPERATION
Programming a Memory channel (Continued)
D
Programming in the DR mode
q
Push to select the DR mode. (p. ??-??)
DR
w
Set the desired contents.
e
Push (C) one or more times to select the "D-
MENU
2" screen.
r D).
Touch [MW](
• The "MW" screen appears.
t L) or [M-CH](L) to select the Mem-
Rotate [BANK](
ory channel to be programmed.
• "---.---.-- ------" appears when no content has been pro-
grammed into the Memory channel. (Blank channel)
y D) for 1 second to program the con-
Touch [MW](
tents into the Memory channel.
u
Check the programmed contents on the Memory
mode. (p. ??-??)
✓
For your reference
The Memory channel contents, programmed in the DR
mode, can also be copied to the VFO. (p. ??-??)
(p. ??-??)
The L, R, C or D in the instructions indicate the part of
the controller.
L: Left side, R: Right side, C: Center bottom
D: Display (Touch panel)
MENU
[BANK]/
[M-CH]
Blinks
11-6
DR
Set the
desired
contents.
Touch
[MW]
Touch
[MW] for
1 second
[Example]:
Programming
"HIRANO43"
in "FROM"/
"HAMACH43"
in "TO" into
Memory
channel A-01.