Icom IC-7100 Instruction Manual page 129

Previous view
13
USING AN SD CARD
Loading the saved settings fi le that are on the SD card (Continued)
y D) to start the fi le check.
Touch [YES](
• While checking the fi le, "CHECKING FILE" and a prog-
ress bar are displayed.
u
After checking, settings data loading
• While loading, "LOADING" and a progress bar are dis-
played.
i
After loading ends, "COMPLETED!" appears.
To complete the loading, reboot the transceiver.
L eft
begins.
13-9
The L, R, C or D in the
D isplay R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
C enter
Appears only when "ALL" or "Select"*
is selected in the LOAD FILE screen,
* If "Select" is selected, only when the
"REF Adjust" check box is checked.