D Transmitting Dtmf Code (Direct Input) - Icom IC-7100 Instruction Manual

Previous view
6
FUNCTIONS FOR TRANSMIT
DTMF memory encoder (Continued)
D
Transmitting DTMF code (Direct Input)
q
Select the desired frequency band. (p. 3-5)
w
On the Mode selection screen, select the FM or DV
mode. (p.3-??)
• The DTMF encoder can be used in the FM or DV mode.
e
Push (C) one or more times to select the
MENU
"M-3" screen (M-3 menu).
• If your are operating in the DR mode, push
once or twice to select the "D-2" screen (D-2 menu).
r D) to display the DTMF mode.
Touch [DTMF](
• The "DTMF" screen is displayed.
t D) to open the DTMF send window.
Touch [SEND](
y
Touch "Direct Input" to display the "DTMF DIRECT
INPUT" screen.
u
Touch the number or character to enter the desired
DTMF code.
i
When all digit are set, touch [TX](
code.
• The transceiver automatically transmits the DTMF code.
• While transmitting, touch [SEND], [EDIT] or [SET](D)
or push (C),
MENU SET
transmission.
• After transmitting, transceiver returns to the "DTMF"
screen.
L eft D isplay R ight
C enter
(C)
MENU
D) to transmit the
(C) or (R), cancels the
XFC
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
Move the cursor
• While transmitting
Highlighted
while transmitting
6-19
Touch [DTMF]
Touch [SEND]
Touch
"Direct Input"
Move the cursor
Delete a number
Transmit the code
Cancel edit
Touch [TX]
The DTMF code scrolls to the
left edge, and disappears every
one digit when the each digit is
sent.