Set Mode Description; D The Set Mode Settings - Icom IC-7100 Instruction Manual

Previous view
17
SET MODE

Set mode description

The Set mode is used to program infrequently changed
values or function settings.
NOTE: The Set mode is constructed in a tree struc-
ture. You may go to the next tree level, or go back a
level, depending on the selected item.
D
The Set mode settings
q
Push (C) to enter the Set mode.
SET
w
If the specifi ed item is not displayed, touch [
(D) one or more times to select the page.
• If [∫](D) or [√](D) is continuously held down, the pages
are quickly scrolled.
• Rotating the Dial also selects the pages.
e
Touch the desired item to go to the next level.
r w and e to show the desired item's
Repeat steps
setting screen.
• To go back the previous tree level, touch [2](D), or
MENU (C).
t
Touch a desired option shown on the display, or [+]/
[–](D) to adjust a level.
• When you touch an option, it is automatically saved and
the screen returns to the previous display.
• Rotating the Dial also adjusts the level.
• Push (C), and then touch "Default" to reset to the
QUICK
default setting, if desired.
• To set other item, touch [2](D), or
a tree level.
y
Push (C) to exit the Set mode.
SET
L eft
∫] or [√]
MENU (C) to go back
17-2
The L, R, C or D in the
D isplay R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
C enter
SET
e
t
y
w
r
u