Electrical Connections - Agilent Technologies 1290 User Manual

Electrical Connections

• The CAN bus is a serial bus with high speed data transfer. The two
• The REMOTE connector may be used in combination with other
• With the appropriate software, the RS- 232C connector may be used to
• The power input socket accepts a line voltage of 100 – 240 VAC ± 10 %
Never use cables other than the ones supplied by Agilent Technologies to ensure proper
N O T E
functionality and compliance with safety or EMC regulations.
1290 Infinity Quaternary Pump User Manual
connectors for the CAN bus are used for internal module data transfer
and synchronization.
analytical instruments from Agilent Technologies if you want to use
features such as start, stop, common shut down, prepare, and so on.
control the module from a computer through a RS- 232C connection.
This connector is activated and can be configured with the
configuration switch.
with a line frequency of 50 or 60 Hz. Maximum power consumption
varies by module. There is no voltage selector on your module because
the power supply has wide- ranging capability. There are no externally
accessible fuses, because automatic electronic fuses are implemented in
the power supply.
Hardware Information

Electrical Connections

12
245