Roland VC-2 Owner's Manual page 52

Effects List
Parameter Value
Phase 0–180 deg
Feedback NORMAL,
Mode CROSS
Feedback -98– +98 %
Cross Mix -100– +100
Level
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
22: Step Flanger
This is a flanger in which the flanger pitch changes in steps.
The speed at which the pitch changes can also be specified in
terms of a note-value of a specified tempo.
Parameter Value
Pre Dly Time 0–50.0 ms
Rate 0.05–10.0 Hz,
note
Depth 0–127
Feedback -98– +98 %
Phase 0–180 deg
Step Rate 0.05–10.0 Hz,
note
Flanger Level 0–127
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
52
Description
Specifies the spaciousness of the
flanger sound.
Specifies the input destination to
which the flanger sound will be re-
turned.
NORMAL: The left flanger sound
will be returned to the left input,
and the right flanger sound to the
right input.
CROSS: The left flanger sound will
be returned to the right input, and
the right flanger sound to the left
input.
This setting makes the flanging
sound of each of right and left
channels return to the input of the
opposite channel. Negative (-) set-
tings will invert the phase.
* When the Feedback Mode is set to
NORMAL, this setting will be ig-
nored.
This setting makes the flanging
sound from each of the right and
left channels mix it with the flang-
ing sound of the opposite channel.
Negative (-) settings will invert the
phase.
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
Description
Specifies the time delay from the
original sound until the flanger
sound is heard.
Specifies the modulation frequen-
cy of the flanger sound.
Specifies the modulation depth of
the flanger sound.
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings will
invert the phase.
Specifies the spaciousness of the
flanger sound.
Specifies the frequency of pitch
change.
Volume of the flanger sound
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
23: Analog Phaser
This effect features two analog-type phasers arranged in
parallel, making it stereo compatible. The sound as it
cyclically drifts in and out of phase is added to the source
sound, creating the modulation with the characteristic of
phasers.
Parameter Value
Shift Mode 4STAGE,
8STAGE
Level
Level
Center Freq 0–127
Resonance 0–127
LFO 1/2 0.02–5.00 Hz,
Rate note
LFO 1/2 0–127
Depth
LFO 1/2 NORM, INV
Phase
Description
Sets the number of stages in the
phase shift circuit (four (4STAGE) or
eight (8STAGE)).
Setting this to eight stages (8STAGE)
increases the number of the frequen-
cy points that sound is canceled,
giving a sharper effect.
4 stage
Freq.
8 stage
Freq.
Sets the center frequency to which
the phaser effect is applied.
Increasing this value moves the ef-
fect point of the phaser into higher
frequency ranges.
Amount of feedback
Increasing this value gives a more
distinctive sound to the effect.
Sets the rate of the swelling sound.
Specifies the depth of modulation.
Sets the phase of both left and right
swelling.
NORM: The left and right phase will
be the same.
INV: The left and right phase will be
opposite.