Roland VC-2 Owner's Manual page 19

If the patch algorithm is Keyboard~
Parameter Value Explanation
Wave Level 0–127 Adjusts the output level of the wave to the
vocoder.
Carrier 0–127 Adjusts the output level of the carrier to
Level the vocoder.
Carrier Re- 0–127 Adjusts the release time of the carrier (the
lease time from when you release a key until the
sound disappears).
Vocoder T00– Selects the type of vocoder formant.
Formant T15
Type
Vocoder 0–127 Adjusts the output level of the vocoder.
Level
Vocoder 0–127 Adjusts the output level of the natural
Natural voice (unprocessed sound of the wave).
Voice
If the patch algorithm is Processor Type 1
Parameter Value Explanation
MIC Level 0–127 Adjusts the output level of the mic to the
vocoder.
Carrier 0–127 Adjusts the output level of the carrier to
Level the vocoder.
Vocoder T00– Selects the type of vocoder formant.
Formant T15
Type
Vocoder 0–127 Adjusts the output level of the vocoder.
Level
Vocoder 0–127 Adjusts the output level of the natural
Natural voice (your own unprocessed voice).
Voice
If the patch algorithm is Processor Type 2
Parameter Value Explanation
MIC Level 0–127 Adjusts the output level of the mic to the
vocoder.
Carrier 0–127 Adjusts the output level of the carrier to
Level the vocoder.
Vocoder 0–127 Adjusts the tone (brightness) of the vocod-
Tone er.
Vocoder 0–127 Adjusts the output level of the vocoder.
Level
Vocoder 0–127 Adjusts the output level of the natural
Natural voice (your own unprocessed voice).
Voice
Try Out the Sound (Patch mode)
19