Roland VC-2 Owner's Manual page 50

Effects List
Parameter Value
Balance DRY100:0WET–
DRY0:100WET
Delay Pan Type
Values Dly 1 Dly 2
1 L63 L32
2 L63 32R
3 L63 63R
4 32R L32
5 63R 0
6 L32 32R
7 0 63R
8 0 63R
9 0 32R
10 63R 32R
16: Analog Delay→Chorus
This effect reproduces the sound of the BOSS CE-1 Chorus
Ensemble. To reproduce the sound of the unit at the time, a
monaural analog-type delay is first inserted in series.
Parameter Value
Dly Sw OFF, ON
Dly Repeat 0–127
Rate
Dly Intensity 0–127
Dly Level 0–127
Chorus Sw OFF, ON
Chorus Mode CHORUS,
VIBRATO
Chorus Inten- 0–127
sity
Vibrato 0–127
Depth
Vibrato Rate 0–127
Chorus Out MONO,
Mode ST-1, ST-2
50
Description
Volume balance between the di-
rect sound (DRY) and the delay
sound (WET)
Dly 3 Dly 4 Dly 5
0 32R 63R
L32 63R 0
L32 32R 0
L63 0 63R
L63 L32 32R
L63 63R 0
L63 32R L32
L32 32R L63
L32 63R L63
0 L32 L63
Description
Turns the delay on/off.
Corresponds to the delay time in a de-
lay effects.
Corresponds to the feedback setting in
a delay effects.
Sets the volume of the delay sound.
Turns chorus or vibrato on/off.
Switches the sound between chorus
and vibrato modes.
When Chorus Mode is CHORUS, this
sets the pitch vibrato speed.
When Chorus Mode is VIBRATO, this
sets the pitch vibrato depth.
When Chorus Mode is VIBRATO, this
sets the pitch vibrato speed.
Switches the output format (mono/
stereo).
MONO: Output is monaural.
ST-1: Chorus sound of the pitch vibra-
tion which phase is inverted between
left and right is mixed with the source
sound. This is a broader chorus, with
a weaker feeling of placement.
ST-2: The left output contains the
source sound, and the right side has
the wavering chorus sound.
17: Digital Chorus
This is a stereo chorus or flanger. Equalizers are provided
before (Pre) and after (Post) the chorus (or flanger).
Parameter Value
Mode CHORUS,
FLANGER
Rate 0.05–10.0 Hz,
note
Depth 0–127
Phase 0–180 deg
Pre Low Freq 50–4000 Hz
Pre Low Gain -15– +15 dB
Pre Hi Freq 2000–20000 Hz
Pre Hi Gain -15– +15 dB
Pre Dly Time 0–50.0 ms
Feedback -98– +98 %
Xover Low- 50–4000 Hz
Freq
Xover Low -36–0 dB
Gain
Xover HiFreq 2000–20000 Hz
Xover Hi -36–0 dB
Gain
Modulation 0–127
Level
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
Description
Selects either chorus or flanger.
Sets the cycle for the chorus or
flanger sound undulations.
Adjusts the depth of modulation
for the chorus or flanger.
Specifies the spaciousness of the
chorus or flanger sound.
Frequency of the low range (Pre)
Gain of the low range (Pre)
Frequency of the high range (Pre)
Gain of the high range (Pre)
Adjusts the delay time from the di-
rect sound until the chorus or
flanger sound is heard.
Adjusts the proportion of the cho-
rus or flanger sound that is fed
back into the effect. Negative (-)
settings will invert the phase.
Attenuates the effect in the range
below the specified frequency.
Specifies how greatly the low
range will be attenuated.
Attenuates the effect in the range
above the specified frequency.
Specifies how greatly the high
range will be attenuated.
Volume of the chorus or flanger
sound.
Frequency of the low range (Post)
Gain of the low range (Post)
Frequency of the high range (Post)
Gain of the high range (Post)