Panel Descriptions
13
Display
This displays information regarding the operation you are
performing.
14
E1–E8 knobs
These knobs control The Top Screen of Patch Mode (p. 16)
parameters in real time.
15
PC CARD Slot
A memory card can be inserted here.
16
VALUE Dial
This is used to modify values. If you hold down [SHIFT] as
you turn the VALUE dial, the value will change in greater
increments.
[MODE]
Opens the Mode Menu window.
[CTRL]
* The CTRL button is not used with the VC-2.
[EXIT]
Return to the Top screen, or close the currently open window. In
some screens, this causes the currently executing function to be
aborted.
[DEC], [INC]
This is used to modify values. If you keep on holding down
one button while pressing the other, the value change
accelerates. If you press one of these buttons while holding
down [SHIFT], the value will change in bigger increments.
[
], [
], [
], [
Moves the cursor location up/down/left/right.
12
] (Cursor Buttons)
17
POWER Switch
Press to turn the power on/off.