Roland VC-2 Owner's Manual page 51

18: Space Chorus
This effect reproduces the sound of Roland's SDD-320 spatial
expression effects. Greater breadth is added.
Parameter Value
Mode 1, 2, 3, 4, 1+4,
2+4, 3+4
Chorus Level 0–127
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
19: Hexa Chorus
Hexa-chorus is a six-stage chorus which adds depth and
spaciousness to the sound. (Six chorus sounds with different
delay times are overlaid.) An equalizer is provided before
(Pre) and after (Post) the hexa chorus.
Parameter Value
Pre Dly Time 0–50.0 ms
Pre Dly Dev 0–50.0 ms
Rate 0.05–10.0 Hz,
note
Depth 0–127
Depth Devia- 0–127
tion
Pan Devia- L63–63R
tion
Chorus Level 0–127
Pre Low Freq 50–4000 Hz
Pre Low Gain -15– +15 dB
Pre Hi Freq 2000–20000 Hz
Pre Hi Gain -15– +15 dB
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
Description
Selects the way in the chorus will
change.
The SDD-320 features four mode
buttons for changing the effect.
This setting determines which
buttons are to be pressed. ("1+4"
represents the condition when
Buttons 1 and 4 are pressed simul-
taneously.)
Volume level of the chorus sound
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
Description
Adjusts the delay time from the di-
rect sound until the chorus sound
is heard.
Specifies the differences in Pre De-
lay time for each of the chorus
sounds
Specifies the modulation frequen-
cy of the chorus sound.
Specifies the modulation depth of
the chorus sound.
Specifies the difference in modula-
tion depth between each of the
chorus sounds.
Specifies the difference in stereo
position between each of the cho-
rus sounds.
0: All of the chorus sounds will be
panned to the center.
L20/R20: each chorus sound will
be placed in 30 degree intervals
relative to the center position.
Volume level of the chorus sound
Frequency of the low range (Pre)
Gain of the low range (Pre)
Frequency of the high range (Pre)
Gain of the high range (Pre)
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
20: Analog Flanger
This effect reproduces the sound of Roland's SBF-325 analog
flanger. You can get three different types of flanger sounds
(adding a metallic swelling sound to the source sound) and
chorus like effect.
Parameter Value
Mode FL1, FL2,
FL3, CHO
Rate 0.02–5.00 Hz,
note
Depth 0–127
Manual 0–127
Feedback 0–127
CH-R Mod NORM, INV
Phase
CH-L Phase NORM, INV
CH-R Phase
21: BOSS Flanger
This effect features a pair of the same flanger circuits used in
the BOSS compact flangers, connected in parallel for stereo
input. This adds a particular metallic-sounding modulation to
the source sound.
Parameter Value
Type NORMAL,
HI-BAND
Manual 0–127
Depth 0–127
Rate 0.05–10.0 Hz,
note
Resonance 0–127
Effects List
Description
Sets the effect type.
FL1: A general monaural flanger
FL2: A stereo flanger that utilizes the
stereo placement of the source sound
FL3: A cross mix flanger that provid-
ing a more intense effect
CHO: Chorus effect
Sets the rate of the swelling of the
flanger sound.
Specifies the modulation depth of the
flanger sound.
Adjusts the center frequency to which
the flanger effect is applied.
Sets the intensity of the flanger's ef-
fect.
When the mode is set to CHO, this
setting will be ignored.
Sets the phase of the right channel.
This is usually set to Normal
(NORM). Setting this to Invert (INV)
inverts the phase of the modulation
(rise and fall) in the right channel.
Sets the phase of the left and right
channels when the source sound is
mixed with the flanging sound.
NORM: Positive phase (+)
INV: negative phase (-)
Description
Selects the model of flanger simu-
lated.
NORMAL: Normal type (BOSS BF-
2)
HI-BAND: High-Band type (BOSS
HF-2). Setting HI-B raise the flang-
ing sound one octave above that at
the NORM.
Sets the center frequency for the ef-
fect.
Sets the depth of the swelling of the
flanger sound.
Adjusts the modulation speed of
the flanger effect.
Sets the intensity of the flanger's ef-
fect.
* If the Feedback Mode is CROSS,
this setting is ignored.
51