Volume Adjustment (Tone/Output Screen) - Roland SuperNATURAL ARX-01 Owner's Manual

Volume adjustment
(Tone/Output screen)
fig.signal-flow.eps
Here you can make settings related to the output of each tone.
Signal Flow
Input
Inst
Level
Pan
COMP/EQ
Tone Output
Output
Level Level
Assign MFX
to MFX
to Mixer
DRY
to Reverb
Reverb Send Level
Parameter Value
Pan L64 –0 –63R
Tone Level 0–127
Output Level 0–127
Output Assign DRY, MFX
Reverb Send
0–127
Level
Mute Sw ON/OFF
Description
Adjusts the pan of the tone. "L64"
places the sound at far left, "0" at
the center, and "63R" at the far
right.
Specifies the volume of the tone.
You'll use this parameter mainly to
adjust the volume balance relative
to the other tones.
Specifies the signal level of each
tone.
Selects whether each tone will out-
put its original sound or will use
MFX.
DRY: The original sound will be
output without processing.
MFX: The sound will be sent
through the multi-effect before be-
ing output.
Specifies the level of the signal sent
from each tone to reverb.
Turns muting on/off for each tone.
27