Vibrato Settings (Vibrato Screen); Volume Balance Settings (Mixer); Volume And Pan Settings (Level/Pan Screen) - Roland SuperNATURAL BRASS ARX-03 Owner's Manual

Vibrato settings (Vibrato screen)

Here you can make settings for the vibrato.
.
Settings for each instrument
Parameter
Play/Standby PLAY, STANDBY
Inst Vibrato Depth 0–127
Settings for each patch
Parameter
Vibrato Rate -64–+63
Vibrato Delay Time -64–+63
Vibrato Depth -64–+63
From Main Screen
F4>F5
(on the Fantom-G)
Value Description
Turns the sound of each
player on/off
Adjusts the vibrato depth
Value Description
Adjusts the vibrato speed
Adjusts the delay time until
vibrato begins to be applied
Adjusts the vibrato depth

Volume Balance Settings (MIXER)

Volume and pan settings (Level/Pan screen)

Here you can adjust the volume and pan settings for each instrument.
Settings for each instrument
Parameter Value
Play/Standby PLAY, STANDBY
Output Assign DRY, MFX
Reverb Send Level 0–127
Inst Pan L64–63R
Inst Level 0–127
From Main Screen
F5>F3
(on the Fantom-G)
Description
Turns the sound of each player on/off
Selects whether the original signal will
be output without further processing or
output via MFX.
DRY:
Output without further processing
MFX:
Output via multi-effect
Specifies the level of the signal sent to
the reverb effect
Adjusts the pan of each instrument
Adjusts the volume of each instrument
31