Roland SuperNATURAL ARX-01 Owner's Manual page 65

47: TIME SKIP DELAY
A delay that changes the delay time in stair-step fashion.
fig.MFX47
L in
Balance D
Time Skip Delay
Feedback
R in
Parameter Value
Delay #1 0–4000 ms, note
0.05–10.0 Hz,
Skip Rate
note
Feedback #2 -98– +98 %
Acceleration #3 0–15
200–8000 Hz,
HF Damp
BYPASS
Pan L64–63R
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance #4
D0:100W
Level 0–127
2-Band
EQ
Balance W
Balance W
2-Band
EQ
Balance D
Description
Adjusts the time until the delay is heard.
Frequency at which the delay time will
change
Adjusts the amount of the delay sound
that's fed back into the effect. Negative (-
) settings invert the phase.
Adjusts the time over which the Delay
Time changes from the current setting to
its specified new setting.
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
don't want to filter out any high frequen-
cies, set this parameter to BYPASS.
Stereo location of the delay
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
L out
R out
65