Roland SuperNATURAL ARX-01 Owner's Manual page 37

04: ISOLATOR
This is an equalizer that radically cuts the volume of selected frequencies,
allowing you to create special effects cutting the volume in various ranges.
fig.MFX04
L in
Isolator
R in
Isolator
Parameter Value
Boost/Cut High #3
Boost/Cut Middle #2
-60– +4 dB
Boost/Cut Low #1
AntiPhase Middle
OFF, ON
Sw
AntiPhase Middle
0–127
Level
Anti Phase Low Sw OFF, ON
Anti Phase Low
0–127
Level
Low Boost Sw OFF, ON
Low Boost Level 0–127
Level 0–127
L out
Low Boost
R out
Low Boost
Description
These boost and cut each of the High, Middle,
and Low frequency ranges.
At -60 dB, the sound becomes inaudible. 0 dB
is equivalent to the input level of the sound.
Settings of the Anti-Phase function for the Mid-
dle frequency ranges.
When turned on, a stereo copy of the sound is
phase-inverted and added to the signal.
Adjusts the level settings for the Middle fre-
quency ranges.
Adjusting this level for certain frequencies al-
lows you to lend emphasis to specific elements
within a sound. (This is effective only for stereo
source.)
Settings of the Anti-Phase function for the Mid-
dle frequency ranges
The parameters are the same as for the Middle
frequency ranges.
Turns Low Booster on/off.
This emphasizes the bottom frequencies to cre-
ate a heavy bass sound.
Increasing this value gives you a heavier low end.
* Depending on the Isolator and filter settings,
this effect may be hard to hear.
Output level
05: LOW BOOST
Boosts the volume of the lower range, creating powerful lows.
fig.MFX05
L in
Low Boost
R in
Low Boost
Parameter Value
Boost Frequency
50–125 Hz
#1
Boost Gain #2 0–12 dB
WIDE, MID, NAR-
Boost Width #3
ROW
Low Gain -15– +15 dB
High Gain -15– +15 dB
Level 0–127
L out
2-Band EQ
R out
2-Band EQ
Description
Center frequency at which the lower
range will be boosted
Amount by which the lower range will be
boosted
Width of the lower range that will be
boosted
Gain of the low frequency range
Gain of the high frequency range
Output level
37