Roland SuperNATURAL ARX-01 Owner's Manual page 61

41: TRIPLE TAP DELAY
Produces three delay sounds; center, left and right.
fig.MFX41
L in
Left Tap
Triple Tap Delay
Feedback
Right Tap
R in
Parameter Value
Left #1
0–4000 ms,
Center #2
note
Right #3
Feedback #4 -98– +98 %
200–8000
HF Damp
Hz, BYPASS
Left/Right/Center
0–127
Level
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance
D0:100W
Level 0–127
Balance D
2-Band
EQ
Balance W
Center Tap
Balance W
2-Band
EQ
Balance D
Description
Adjusts the time until the delay sound is
heard.
Adjusts the amount of the delay sound
that's fed back into the effect. Negative (-
) settings invert the phase.
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
do not want to filter out any high frequen-
cies, set this parameter to BYPASS.
Volume of each delay
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
42: QUADRUPLE TAP DELAY
This effect has four delays.
fig.MFX42a
L in
L out
Feedback
Quadruple Tap Delay
R out
R in
Stereo location of each delay
fig.MFX42b
2 3
1
R
L
Parameter
Delay 1–4 0–4000 ms,
#1–#4 note
Level 1–4 0–127
Feedback -98– +98 %
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Balance D
4
Value Description
Adjusts the time until the delay sound is
heard.
Volume of each delay
Adjusts the amount of the delay sound
that's fed back into the effect. Negative (-
) settings invert the phase.
L out
Balance W
Balance W
R out
61