Roland SuperNATURAL ARX-01 Owner's Manual page 49

25: GUITAR AMP SIM (Guitar Amp Simulator)
This is an effect that simulates the sound of a guitar amplifier.
fig.MFX25
L in
Pre Amp
R in
Parameter Value
Pre Amp Sw OFF, ON
JC-120,
Clean Twin,
Match Drive,
BG Lead,
MS1959I,
Pre Amp Type #1 MS1959II,
MS1959I+II, SLDN
Lead, Metal 5150,
Metal Lead,
OD-1, OD-2 TURBO,
Distortion, Fuzz
Pre Amp
0–127
Volume #2
Pre Amp
0–127
Master #3
Pre Amp Gain Low, Mid, High
Pre Amp Bass
Pre Amp Middle
0–127
Pre Amp Treble
0–127
Pre Amp
(MATCH DRIVE:
Presence
-127 - 0)
L out
Pan L
Speaker
Pan R
R out
Description
Turns the amp switch on/off.
Type of guitar amp
Volume and amount of distortion of the
amp
Volume of the entire pre-amp
Amount of pre-amp distortion
Tone of the bass/mid/treble frequency
range
* Middle cannot be set if "Match Drive"
is selected as the Pre Amp Type.
Tone for the ultra-high frequency range
Parameter Value
Pre Amp Bright OFF, ON
Speaker Sw OFF, ON
(See the table be-
Speaker Type #4
low.)
Mic Setting 1, 2, 3
Mic Level 0–127
Direct Level 0–127
Pan L64–63R
Level 0–127
Description
Turning this "On" produces a sharper
and brighter sound.
* This parameter applies to the "JC-
120," "Clean Twin," and "BG Lead"
Pre Amp Types.
Determines whether the signal passes
through the speaker (ON), or not
(OFF).
Type of speaker
Adjusts the location of the mic that's
capturing the sound of the speaker.
This can be adjusted in three steps,
from 1 to 3, with the mic becoming
more distant as the value increases.
Volume of the microphone
Volume of the direct sound
Stereo location of the output
Output level
49