Roland SuperNATURAL ARX-01 Owner's Manual page 59

39: STEREO DELAY
This is a stereo delay.
When Feedback Mode is NORMAL:
Balance D
L in
Delay
Feedback
Feedback
Delay
R in
Balance D
When Feedback Mode is CROSS:
fig.MFX39b
Balance D
L in
Delay
Feedback
Feedback
Delay
R in
Balance D
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Parameter Value
NORMAL,
Feedback Mode
CROSS
Delay Left #1
0–2000 ms,
note
Delay Right #2
Phase Left
NORMAL,
INVERT
Phase Right
Feedback #3 -98– +98 %
200–8000 Hz,
HF Damp
BYPASS
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance #4
D0:100W
Level 0–127
Description
Selects the way in which delay sound is
fed back into the effect. (See the figures
above.)
Adjusts the time until the delay sound is
heard.
Phase of the delay sound
Adjusts the amount of the delay sound
that's fed back into the effect. Negative (-
) settings invert the phase.
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
don't want to filter out any high frequen-
cies, set this parameter to BYPASS.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
59