Roland SuperNATURAL ARX-01 Owner's Manual page 62

Parameter
200–8000
HF Damp
Hz, BYPASS
D100:0W–
Balance
D0:100W
Level 0–127
62
Value Description
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
do not want to filter out any high frequen-
cies, set this parameter to BYPASS.
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
43: MULTI TAP DELAY
This effect provides four delays. Each of the Delay Time parameters can be
set to a note length based on the selected tempo. You can also set the
panning and level of each delay sound.
fig.MFX43
L in
Feed
Delay 1
back
Delay 3
Multi Tap Delay
Delay 4
Delay 2
R in
Parameter Value
Delay 1–4 0–4000 ms,
Adjusts the time until Delays 1–4 are heard.
#1–#4 note
Pan 1–4 L64–63R Stereo location of Delays 1–4
Level 1–4 0–127 Output level of Delays 1–4
Adjusts the amount of the delay sound that's fed
Feedback -98– +98 % back into the effect. Negative (-) settings invert
the phase.
Adjusts the frequency above which sound fed
200–8000 back to the effect is filtered out. If you don't want
HF Damp
Hz, BYPASS to filter out any the high frequencies, set this pa-
rameter to BYPASS.
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
D100:0W– Volume balance between the direct sound (D)
Balance
D0:100W and the effect sound (W)
Level 0–127 Output level
Balance D
2-Band
EQ
Balance W
Balance W
2-Band
EQ
Balance D
Description
L out
R out