Roland SuperNATURAL ARX-01 Owner's Manual page 47

21: STEREO FLANGER
This is a stereo flanger. It produces a metallic resonance that rises and falls
somewhat like a jet airplane taking off or landing. A filter is provided so
that you can adjust the timbre of the flanged sound.
fig.MFX21
Balance D
L in
Flanger
Flanger
R in
Balance D
Parameter Value
OFF, LPF,
Filter Type
HPF
200–8000
Cutoff Freq
Hz
0.0–100.0
Pre Delay
ms
0.05-10.00
Rate #1
Hz, note
Depth #2 0–127
Phase 0–180 deg
Feedback #3 -98– +98 %
2-Band
L out
EQ
Balance W
Feedback
Feedback
Balance W
2-Band
R out
EQ
Description
Type of filter
OFF: no filter is used
LPF: cuts the frequency range above the
Cutoff Freq
HPF: cuts the frequency range below the
Cutoff Freq
Basic frequency of the filter
Adjusts the time until the flanger sound is
heard.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Adjusts the amount of the flanger sound
that's fed back into the effect. Negative (-
) settings invert the phase.
Parameter Value
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance #4
D0:100W
Level 0–127
Description
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the flanger sound (W)
Output level
47