Metronome Volume; Changing The Sound Of The Metronome; How The Expression Pedal Functions (Exp. Source); Function During Recording - Roland Music Atelier AT-10S Owner's Manual

Metronome Volume

Carry out the steps below to adjust the volume of the
metronome.
1. Press the [Function] button.
2. Using the Select [-] [+] buttons, select "Metro-
nome Vol."
fig.09-03
3. Press the Value [-] [+] buttons to select the
desired volume level (1–10).
Increasing the value will raise the volume of the metro-
nome.
To return to the basic screen, press the [Function] button.
Changing the Sound of the
Metronome
You can choose one of 4 different sounds for the metronome.
1. Press the [Function] button.
2. Use the Select [-] [+] buttons to select "Metro-
nome Sound."
fig.09-04
3. Press the Value [-] [+] buttons to select the type
of sound for the metronome.
CLICK&BELL
ELECTRONIC
VOICE ENGLISH
VOICE JAPANESE
To return to the basic screen, press the [Function] button.
This setting remains stored in memory even while power is
turned off.
Conventional metronome sound
Electronic metronome sound
Human voice (English)
Human voice (Japanese)
Various Other Settings (Function Button)
How the Expression Pedal
Functions (Exp. Source)
Specify how the Expression Pedal will function when your
performance is being recorded and when ATELIER song files
are being played back.

Function During Recording

Specify whether Expression Pedal operations will be
recorded or not while your performance is being recorded.
1. Press the [Function] button.
2. Press the Select [-] or [+] button to select "Exp.
Source."
fig.09-06
3. Press the [Rec] button.
4. Press the Select [-] [+] buttons button to select
"Recording."
fig.09-07
5. Press the Value [-] [+] buttons to specify the
pedal function.
PEDAL Expression Pedal movements will be re-
corded.
COMPOSER Expression Pedal movements will not
be recorded.
To return to the basic screen, press the [Function] button.
51