Changing The Metronome Volume; Changing The Metronome Sound - Roland HP-2 Owner's Manual

Changing the beat of metronome
3
Press the [Beat] button.
The currently selected beat will be displayed.
4
Press the [+] or [-] button.
If you press the [+] or [-] button, the beat will change.
If you press the [+] and [-] buttons simultaneously, the beat will go back to what it
was before you changed it.
fig.disp-beat
Display
2.2
0.4
2.4
3.4
4.4
5.4
Stopping the metronome
5
Once again press the [
dark.
The metronome will stop.

■ Changing the Metronome Volume

The volume of the metronome can be adjusted, with eight volume levels available.
1
Hold down the [
The currently specified volume will be displayed.
Continue to hold down the [
to sound the metronome, and change the volume.
fig.disp-metrovol

■ Changing the Metronome Sound

1
Hold down the [Beat] button and press the [+] or [-] button.
The currently specified sound number will displayed.
Continue to hold down the [Beat] button, and press the [+] or [-] button to sound the
metronome, and change the metronome sound.
beat Display
2/2
6.4
Only weak beats 7.4
2/4 3.8
3/4 6.8
4/4 9.8
5/4
12.8
(Metronome)] button, getting its indicator to go
(Metronome)] button and press the [+] or [-] button.
(Metronome)] button, and press the [+] or [-] button
Chapter 2. Performance
beat
6/4
7/4
3/8
6/8
9/8
12/8
NOTE
It is not possible to change the
beat during song playback or
recording.
Correspondence between
beat and tempo display
Beat Tempo Value
2/2 =10–125
x/4 =20–250
x /8 =40–500
This is set to "4" when the
instrument is turned on.
When you hold down the [
(Metronome)] button, the
currently specified metronome
volume will be displayed.
This is set to "t. 1" when the
instrument is turned on.
When you hold down the [Beat]
button, the currently specified
sound number will be
displayed.
15