System Management; Switch Name - Supermicro SSE-G48-TG4 Configuration Manual
L2/l3 blade/top of rack switches
Hide thumbs
Also See for SSE-G48-TG4:
- Reference manual (985 pages) ,
- Quick configuration manual (24 pages) ,
- User manual (318 pages)
Table of Contents
Advertisement
1.6 System Management
Supermicro switches can be administered by configuring various operations.
Switch Name
•
Switch Location
•
Switch Contact
•
System MTU
•
Port mirroring
•
MAC aging
•
Reload or reset
•
Defaults – System Management
Parameter
Switch name
System contact
System location
MAC aging
MAC table static entries
System MTU
Port mirroring
Port mirroring direction
1.6.1 Switch Name
Supermicro switches can be assigned a name for identification purposes. The default switch name is
SMIS. The switch name is also used as a prompt.
Follow the steps below to configure the switch name.
Step Command
Step 1
configure terminal
Step 2
device name <devname(15)>
Step 3
end
Step 4
show system information
The device name configuration is automatically stored as part of the startup-configuration
file.
Default Value
SMIS
http://www.supermicro.com
Supermicro
300 secs
None
1500 bytes
Disabled
Both
Supermicro L2/L3 Switches Configuration Guide
Description
Enters the configuration mode.
Configures switch name and prompt.
Devname – Switch name specified with
1-15 alphanumeric characters.
Exits the configuration mode.
Displays
the
system
configuration.
information
39
Advertisement
Table of Contents
