7705 Sar Platform Prerequisites - Alcatel-Lucent 9558HC User Manual

7705 SAR platform prerequisites

MPR-e
• optical only with MPT-HC V2 and MPT-XP
• An FE (minimum) port
For local management (provisioning phase only):
• VLAN management capability to create a tagged service between the local
management port and MPT Ethernet port
One service open with VLAN ID on GE Port. Default VLAN ID: 4080
If local management is not required, the NE could be supervised through TMN RF.
One GE traffic port:
• electrical to be used with MPT-MC, MPT-HC V2, and MPT-XP or
• optical only with MPT-HC V2 and MPT-XP
For local management (provisioning phase only):
• An FE (minimum) port
• VLAN management capability to create a tagged service between the local
management port and MPT Ethernet port
One service open with VLAN ID on GE Port. Default VLAN ID: 4080
If local management is not required, the NE could be supervised through TMN RF.
Any 7705 SAR chassis can be connected to an MPR-e in the same way as any other Ethernet
generic device. In addition, connecting a SAR-8 or SAR-18 chassis with a Packet Microwave
Adapter card (3HE02782AA) provides key additional features depending on the 7705 SAR
software release.
The following levels of integration are available:
• 7705 SAR and MPR-e standalone mode
• 7705 SAR and MPR-e in Single NE mode
• 1+1 HSB in Single NE mode with 7705 SAR only
Product information and planning
57