Waveguide Flange Data; Mpt-Mc (Mpr-E); Table 68 Mpr-E Waveguide Flange Data; Table 69 Mpr-A Waveguide Flange Data - Alcatel-Lucent 9558HC User Manual

Functional description

Waveguide flange data

Wa 5.8 L6
ve- GHz GHz
guid
e
WR1 WR1
Typ
37 37
e
Waveguid 5.8
e Type GHz
WR1
37

MPT-MC (MPR-E)

146
Table 68: MPR-E waveguide flange data
U6 7
GHz GHz
WR1 WR
37 112
Table 69: MPR-A waveguide flange data
L6 U6
GHz GHz
WR13 WR13
7 7
MPT-MC is similar to MPT-HC V2 from architecture standpoint.
The only differences are:
• MPT-MC cannot be connected in optical -> 100m length cable limitation.
• MPT-MC does not support the XPIC configuration.
Two mechanical solutions are adopted:
• with embedded diplexer for cost optimisation (6 GHz and from 11 GHz to 38 GHz),
where the diplexer is internal to the MPT-MC cabinet; this type of MPT-MC is
identified by one Logistical Item only;
• with external diplexer: due to a vary high number of shifters, the diplexer is external
for the flexibility of the shifter customization (L6, U6, 7 GHz and 8 GHz), where
MPT-MC is composed by two independent units: the EXTERNAL DIPLEXER
assembly (containing the diplexer) and the RF TRANSCEIVER assembly
(containing the RF section); each of this type of MPT-MC is identified by two
Logistical Items, one for the EXTERNAL DIPLEXER assembly and another for the
RF TRANSCEIVER assembly. To read the EXTERNAL DIPLEXER assembly
identification label it is necessary to separate the EXTERNAL DIPLEXER assembly
from the RF TRANSCEIVER assembly.
8 10.5 11
GHz GHz GH
z
WR1 WR WR
12 75 75
7 8 GHz 11
GHz GHz
WR1 WR11 WR7
13 3 5
13 15 18 23
GH GH GH GH
z z z z
WR WR WR WR
62 62 42 42
15 18
GHz GHz
WR6 WR4
2 2
25 38
GH GH
z z
WR WR
42 28
23 38
GHz GHz
WR4 WR2
2 8
MPR-e