Figure 141 Mct Connected To Main Mpt - Alcatel-Lucent 9558HC User Manual

How to configure the synchronization:
MPR-e
All other parameters, particularly troubleshooting commands, are not replicated. These
parameters and commands must be set properly on each MPT using the MCT.
1. Configure the main MPT according to the other procedures in the
section.
2. From the MCT connected to the main MPT, set up the synchronization:
→ Click on the Align Spare MPT Configuration icon
The Align Spare MPT Configuration dialog box opens.
NE management by software application
Figure 141: MCT connected to main MPT
Configuration
239