Navigator area
222
A specific range of DiffServ Code Points can be assigned to a specific egress queue
(queue 1 to queue 5).
Note: Queue 5 is the highest-priority queue, queue 1 is the lowest-priority queue.
You can click on the Default button to restore the default classifications.
Click on the Add button to add a range that can be assigned to a specific queue.
2. EtherType classification
Click on the Add (or Add Last) button to assign a specific egress queue (queue 1 to
queue 5) to a specific EtherType.
Note: Queue 5 is the highest-priority queue; queue 1 is the lowest-priority queue.
Figure 116: DiffServ
MPR-e