Synchronization: 7705 Sar And Mpr-E Single Ne - Alcatel-Lucent 9558HC User Manual

Functional description

Synchronization: 7705 SAR and MPR-e Single NE

170
Table 75: 7705 SAR PMC card MAC addresses
SAR slot PMC port #
#
12 1
2
3
4
Note: Slot 7 TO 12 are applicable to SAR-18 chassis only.
The source and destination MAC addresses can also be summarized by the following formula
linked to the slot and port number in HEX:
PMC card source MAC address: 00-80-9F-09-F<slot#>-<port#><slot#>
PMC card destination MAC address: 00-80-9F-09-F<slot#>-0<slot#>
For example, for slot number 4 and port number 2:
Source MAC address = 00-80-9F-09-F4-24
Destination MAC address = 00-80-9F-09-F4-04
In a Single NE solution no special configuration is required. Both 7705 SAR and MPR-e self-
detect the port selected and consequently configure the correct synchronization method.
When copper interface is used either using native RJ-45 or Copper SFP on the PMC
(7705 SAR) side, PCR is selected both by MPR-e and 7705 SAR self-assigning right MAC
addresses.
When optical interface is used, SynchE is selected by both MPR-e and 7705 SAR.
Source MAC address
00-80-9F-09-FC-1C
00-80-9F-09-FC-2C
00-80-9F-09-FC-3C
00-80-9F-09-FC-4C
Destination MAC address
00-80-9F-09-FC-0C
MPR-e