Figure 103 Electrical 1Gb/S Active Configuration With Pcr Synchronization - Alcatel-Lucent 9558HC User Manual

Figure 103: Electrical 1Gb/s active configuration with PCR synchronization
MPR-e
If PCR has been selected, the Source MAC Address and the Destination MAC Address must
be entered.
Note: Multicast MAC addresses are not supported.
Synchronization must be provisioned for PCR between the MPR-e standalone and a PMC
port on the 7705 SAR. The source and destination MAC addresses for the 7705 SAR are
available in Table 75.
NE management by software application
209