Sar And Mpr-E Single Ne Ip Addresses; Quality Of Service (Qos); Qos In The Mpt - Alcatel-Lucent 9558HC User Manual

Functional description

SAR and MPR-e Single NE IP addresses

Quality of service (QoS)

QoS in the MPT

164
The default address is 192.168.100.1.
The default subnet mask is 255.255.255.0 (/24).
The default TMN In-Band VLAN ID is 4080.
When MPR-e is used in Single NE mode with 7705 SAR, MPR-e does not have its own IP
address. Conversely, all MPR-e to 7705 SARs are reachable with any SAR IP addresses
(IPv4 only).
MPR-e management traffic is handled by SAR routing function like any other IP stream. As
a direct consequence, there is no longer a special channel carrying TMN that the MPR-e can
explicitly recognize by use of a VLAN ID. Management traffic back and forth from the MPR-
e follows the 7705 SAR QoS policy and profile.
The QoS functions must be properly configured in order to achieve the required behavior on
Ethernet flows that will be transmitted.
Figure 57 shows an overview of the QoS implementation inside the MPT.
MPR-e